Mosaic pattern decorative floor tile (TSCR266)
Chip size of mosaic: Irregular
Sheet size of mosaic: 300x300mm
Packing of mosaic:
It is packed by mesh-mounted
Packed by carton and wooden pallets
Features of Metal Mosaic:
Liquid and vapor proof, easy to clean
High and low temperature resistant
Easy to install with standard tool and material
Metal mosaic was widely used in background wall since it give us a
feeling about Retro. It can not resist acid and alkali so it always
used in dry and no straight sunlight place. It is excellent for
wall decoration and can make your decoration much more elegant
luxurious and full of artistry.
Lead time: 15-30 days for 1x20' container.
Quality Approvals: ISO9001
Used in background walls, Walls Living room Halls etc.
Available in various pattern.
1. Preparation of the wall surface: Make sure the wall surface to
be smooth, flat, solid, dry and perfectly clean. We suggest to
create a white base about 2mm.
2. Preparation for lying: Score lines on the surface to help the
sheet posited correctly.
3. Laying: When the white cement completely dry, using the straight
of a towel spread out the netural special adhesive for glass mosaic
uniformly on the wall. Make sure the adhesive spread all the
surface. One time should not be more then 1m2. Press the fiberglass
mesh backing directing into adhesive.
4. Filling the seam: Using no sand mosaic sealant for particular
care, spread the sealant using a rubber flout, and then leave the
5. Cleaning: Using a damp sponge to remove any grout.
6. Please don't' use black cerement, white cerement or tile
adhesive to bedding or caulk the mosaic.
1. It can not be scratched.
2. The stainless steel surface must be regular cleaning and
maintenance, in order to maintain its gorgeous surface and prolong
the using life.
3. Cleaning of stainless steel surface must be noticed do not
scratch the surface phenomenon, avoid the use of bleach
compositions and abrasive cleaning liquid, a steel ball, grinding
tools. To remove the washing liquid, washing with clean water to
rinse the surface at the end of.
4. Use soap, weak detergent or warm water to remove the surface
dust and normal dirt.
5. If the surface was polluted by oil, use a soft cloth to wipe
clean, then use neutral detergent or special detergent to clean.
Trade Terms: FOB, EXW
Payment: By T/T, L/C
For more details, please kindly visit our website.&
|No.||Test item||Unit||GB/T4100.1-2006|| ||test result||Result|
|1. ||Length tolerence||mm||Length||600±1.0||599.7~600.0||passed|
|2. ||Side straight ||%||±0.2|| ||-0.04~ +0.05||passed|
|3. ||Right angle ||%||±0.2|| ||-0.05~ +0.04||passed|
|4||Surface Flatness ||(%)||Center curvature||±0.2||-0.04~+0.04||passed|
|5||Surface quality ||-----||A minimum of 95% of the tiles shall be free from visible defects
that would impair the apperance of a major area of tiles.|| ||No visible defects||passed|
| || || || || || || |
|6||Water absorption||%||Mean value E‰¤0.5 || ||0.08||passed|
| || || ||Single value‰¤0.6|| || 0.06~0.10|| |
|7||Breaking pressure||N||When the thickness is ‰¥7.5mm, the average shall be ‰¥1300|| ||1764.6||passed|
|8||Modulus of rupture|| MPa||Mean value‰¥35 || ||37.2||passed|
| || || ||Single value‰¥32|| ||36.6~38.0|| |
|9||Luster degree||---||‰¥ 55|| ||70-73||Passed|
|10||Abrasion resistance||mm3||‰¤ 175|| ||131||Passed|
|11||Resistance to frost|| -----||No crack or peeling.|| ||No||passed|
|12||Resistance to Household Chemical Reagent|| -----|| Not lower than UB level|| ||UA level||passed|
|13||Resistance to Chemical of swimming pool||-----||Not lower than UB level || ||UA level||passed|